Performance, Features & Benefits

• Engine cleanliness
  Has built a reputation over many years for very good engine cleanliness.
   
• Rapid neutralisation of acidic combustion products
  Gives long-term protection against corrosion of ferrous and non-ferrous metals.
   
• Thermal stability and resistance to oxidation
  Provides excellent high temperature deposit control and contributes to long oil life.
   
• Suitability for centrifugal separators
  High detergency/low dispersancy formulation releases contaminants and water readily in centrifugal separators.

Main Applications

• Medium-speed industrial or marine propulsion and auxiliary engines, burning residual fuel oils, which create conditions of moderate oil stress. These conditions usually occur: ·
  - in engine designs more than 5 years old, or
  - where oil consumption is 1g/kWh or more, or
  - in newer designs where load factors are predominantly 85% or less, or
  - where fuels with sulphur <3% are in use.
   
• Marine engine reduction gears and certain other ship-board applications, where specialist lubricants are not required.
   
• Medium-speed engines burning residual fuel need very specialised lubricants. Heavy fuels contaminate the oil with asphaltenes, requiring special types of detergency to avoid sludges. The combustion of high sulphur fuels produces sulphur acids, which cause high wear rates of piston rings and cylinder liners unless neutralised by a high basicity reserve in the oil. The oil is in service for very long periods, so centrifugal separators are used to remove water and combustion contaminants from the oil. Medium-speed engine oils must be specially designed to release these contaminants in the separator.

Specifications, Approvals & Recommendations

• Shell Argina T enjoys a comprehensive range of Original Equipment Manufacturers' approvals through field experience over many years.
• Meets the engine test criteria for API CF
• For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk.

Health, Safety & Environment

• Health and Safety
  Shell Argina T 40 (2005) is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.
  
  Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.
  
  Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet.
   
• Protect the Environment
  Take used oil to an authorised collection point. Do not discharge into drains, soil or water.